Vinotemp WM-1500HZD Manual e Guia do Utilizador

wwwwww..wwiinneemmaattee..ccoomm Wine Cooling System WM-1500HZD, WM-2500HZD WM-3500HZD, WM-4500HZD WM-6500HZD, WM-8500HZD Installation, Use &

- 9 - Fig. 2.4 TOP EXHAUST GASKET Fig. 2.5 COOLING UNIT M

- 10 - Fig. 2.6 SECURING BRACKET & SCREW

- 11 - Fig. 2.7 CABINET GRILLE

- 12 -3. WM-3500~8500HZD through-wall installation Fig. 2.8 THROUGH-

- 13 -NOTE: The cooling unit can be installed with the front of the un

- 14 - Fig. 2.11 TOP EXHAUST GASKET Fig. 2.12 WALL GRILLE 4. Cel

- 15 -Doors shall be of a minimum size, insulated to at least R13 and

- 16 -Temperature and Humidity 1. The controller Fig. 3.1 TEMPERATUR

- 17 -4) Alarm Signals The alarm codes are described as follows. ME

- 18 -6. Parameter Programming 1) Press and hold the SET + keys unti

- 1 -Important Safety Information NOTES: • Do not plug in until 24 h

- 19 -In case there is excessive frost, the parameters FnC = C-y, idF

- 20 -Care Guide 1. Cleaning Condenser • Clean the condenser regul

- 21 -Troubleshooting This Troubleshooting Chart is not prepared to r

- 22 -high or not cooling and running continually b. Cellar too la

- 23 -low b. Low ambient temperature c. Air probe fault d. Temperatu

- 24 -Electrical Wiring Diagrams Fig. 6.1 WM-1500~2500HZD WIRING DIA

- 25 - Fig. 6.3 WM-3500~8500HZD WIRING DIAGRAM Fig. 6.4 WM-3500~8500

- 26 -Customer Support If you need further assistance, please contact

- 27 -Warranty Thank you for choosing a Vinotemp cooling unit. Ple

- 28 -is determined to be faulty and is within the twelve month warran

- 2 -Table of Contents Features & Specifications.…………………….…………….

- 3 -Features and Specifications • HZD series cooling units are desi

- 4 - Fig. 1.2 WM-3500~8500HZD FEATURE DESCRIPTIONS Fig. 1.3 WM-15

- 5 - Fig. 1.4 WM-3500~8500HZD DIMENSIONS The specifications and dim

- 6 -Installation Instructions NOTES: • Mounting brackets, screws,

- 7 -2. WM-1500~2500HZD cabinet installation • Cut a rectangular in

- 8 - Fig. 2.2 THREAD INSERT Fig. 2.3 REAR GASKET